popup

Heat Resistant Filler 310ml Vitcas for Stoves and Fireplaces Expand

Heat Resistant Filler 310ml Vitcas for Stoves and Fireplaces

Vitcas Vitcas

Heat Resi board filler 310ml

New

Vitcas® Heat Resistant Filler is a ready mixed material for filling small cracks and joints in high temperature areas. On the joints of High Temperature Plasterboard. Resistant up to 1000°C /1830°F

Main uses of Heat Resistant Filler:

  • Small cracks on the chimney breast especially around cassette stoves
  • On the joints of VITCAS High Temperature Plasterboard

Application:
Make sure the area is clean and that all dirt, dust and grease is removed. Cut off the top of the cartridge, screw on the nozzle and cut the nozzle to the required size. Apply to the area to be filled using a cartridge gun. Smooth the surface with a clean scraper. The material will set faster when warm. If required the surface may be sanded once the filler has set. Certain types of emulsion paint may require the use of a proprietary stabilising primer before application - check with the instructions on the paint.

Technical:
Colour: White
Vitcas® Heat Resistant Filler can be sanded and overpainted with water based emulsion paints..
Resistant up to 1000°C /1830°F
For interior use only
Size: 310ml


Coverage: A guide to the amount of the material contained in one 310ml cartridge
Bead dia. 4mm – length approx. 18 metres
Bead dia. 6mm – length approx. 8 metres
Bead dia. 8mm – length approx. 5 metres
Bead dia. 10mm – length approx. 3 metres

€ 10.00

tax incl.

Size310ml
Otherup to +1000*C /1830*F
Accept

This website use cookies. By using this website you agree to out Terms and Conditions. READ T&C's HERE